About three years ago I was doing another project with large panoramic glazing. The client wanted sliding doors 3.5 meters high across the entire width of the facade — about 10 meters. I proposed a classic: Alutech SL160. Technically everything worked out, but when we installed it and the client saw the result, he said: «Artem, this is like a tank. The profile is thick, the sash is massive — where’s that lightness we discussed in the visualizations?»
And he was right. Standard lift-and-slide systems are 100 millimeters of profile around the perimeter of the glass unit. Massive, metal-intensive, visually heavy. For three-meter height — fine, but when you want a truly panoramic solution with minimum structures — it doesn’t work.
That’s when I started studying premium sliding systems. SkyFrame, SolarLux, Schuco SS77PD, Reynaers Highfinity, AirLux, Keller, Vizio, Arama — I dug through everything on the market. Traveled to Europe, saw it live, talked with manufacturers. And ultimately settled on the Polish Moreview system from the YAWAL concern.
Now it’s our flagship product. We install it on all premium properties. We have a project in progress with sliders 5900 mm in height and 12 meters in length. Each sash 3 meters by 5900 — it’s something incredible. And in this article I’ll tell you why I chose Moreview specifically, how this system surpasses competitors and why it’s better suited for a cold climate than Swiss and Italian analogs.
Standard vs. premium: what is the fundamental difference?
Technically reliable, tested over years. But there are limitations:
- Sash height maximum 3-3.5 meters. In some systems you can squeeze out 3700, but that’s already at the edge of technical capabilities.
- Profile is wide — about 100 mm around the sash perimeter. Visually massive.
- Metal-intensive construction — lots of aluminum, accordingly, more cold bridges.
For most properties — an excellent option. But when a client wants truly panoramic glazing with a «wall of glass» effect — classic systems don’t deliver the desired result.
Premium minimalist sliding systems
This is a completely different class of systems. Thin vertical profiles — from 25 to 35 millimeters depending on the model. The upper and lower frames are completely recessed into the finishing — into the ceiling and floor. The sash remains practically without visible framing. It turns out that you see a huge glass that smoothly slides to the side, and aluminum structures are visually almost absent.
Sash height — from 4 to 6 meters. This allows realizing projects that are physically impossible on standard systems.
Examples of such systems: SkyFrame (Switzerland), SolarLux (Germany), Schuco SS77PD, Reynaers Highfinity, AirLux, Keller, Vizio, Arama. And, of course, Moreview from YAWAL.
Why did I choose a Polish system over a Swiss or German one?
When you study the premium sliding systems market, the first thing that catches your eye is Swiss SkyFrame. A market legend, the quality standard. But the price tag is correspondingly astronomical. .
I analyzed all available systems — European brands attempts to copy Western solutions (like Vizio, Mars and others). Local developments have their pluses — availability, fast delivery. But in terms of technical characteristics they still fall short of European originals.
Ultimately I came across YAWAL — a Polish concern that in scale is comparable to Aluprof, Schuco, Reynaers. A very large manufacturer with a powerful engineering base. And they have the Moreview system, which in terms of overall parameters turned out to be better than all competitors.
Superiority in thermal performance
The first thing that caught my attention was the thermal performance. Moreview is designed with wide thermal breaks and high-quality insulation. The system is suitable for a northern regions.
Moreview works reliably in northern regions. I have several projects that are in their second or third season of operation — no complaints whatsoever about condensation or freezing. The system retains heat, the seals work, and the geometry doesn’t warp.
This is a very important point. Because the client pays a huge amount of money for a premium system, and then it turns out that in winter, condensation runs down the glass or there’s a cold draft near the threshold — that’s a disaster for the contractor’s reputation.
Load capacity up to 1200 kg — a record among competitors
The second parameter by which Moreview pulls ahead is sash weight. The system allows making sashes weighing up to 1200 kilograms. That’s a lot.
Most competitors — even top ones — have a limit of 800-1000 kg. And 1200 kg means the ability to make truly huge sashes with thick glass units at great height.
For example, our current project: a sash 3000 mm by 5900 mm. Single-chamber glass unit 2×12mm. Weight around 800 kg. If we wanted to install a double-chamber — we’d go over a ton. On some systems this is already impossible, but Moreview handles it.
At lower heights — 4.5-5 meters — you can safely install double-chamber glass units and still stay within the load capacity. For a cold climate, where thermal insulation is critical, this is a huge plus.
Filling range 46-60 mm
Moreview accepts glass units with thickness from 46 to 60 millimeters. A wide range that gives flexibility in choosing the filling.
Want a single-chamber with energy-saving coating — 46 mm is quite sufficient. Need a double-chamber for better thermal insulation — you can install 60 mm.
The glass unit is glued into the sash using a special technology. This isn’t just installation on gaskets, as in regular systems — structural glazing with sealant is used here. You get a single rigid structure that doesn’t rattle, doesn’t play, works like a monolith.
Height up to 6 meters — capabilities that are not available in standard systems
And now the most interesting part. Moreview allows making sashes up to 6 meters high. Previously I hadn’t yet encountered projects where all 6 were needed — usually 4-5 meters is sufficient. But the very fact that such a possibility exists opens up huge prospects.
Currently we have a project in progress: height 5900 mm, length 12 meters. Four sashes 3 meters wide each. This is panoramic glazing of the entire wall of a two-story space. Visually — simply cosmic, when you see it live.
On standard lift-and-slide systems, this is physically impossible to do. Maximum 3.5-3.7 meters — that’s it, beyond that the profile can’t withstand it. You have to make a mullion in the middle, divide the sash horizontally. All the aesthetics of the panorama are killed.
With Moreview there’s no such problem. Want 5 meters without a transom — no problem. 5.9 meters — not an issue. This really opens up a new level of architectural possibilities.
Automation — not an option, but a necessity
When a sash weighs 600 kg and more, manual opening is physically impossible. That is, technically it’s possible, of course, but you need to apply such force that it’s simply inconvenient. Therefore, on all large sashes we install automation.
This is an electric drive that smoothly opens and closes the sash. Control — from a remote, from buttons on the wall, you can integrate it into a smart home system and control from a smartphone.
On our project 5900×12000, all sashes have automation. Press a button — a three-meter glass wall weighing nearly a ton silently slides to the side. It’s truly impressive.
Two design options: Moreview and Moreview S
Moreview — the frame is recessed into the floor, but grooves remain
In classic Moreview, the bottom frame is completely recessed into the floor. The sash travels on rails that are flush with the finished floor level. Visually this looks perfect: as if the glass unit stands directly on the floor, without visible profiles.
But there’s a nuance. When you slide the sashes open, grooves remain in the floor — tracks along which the sashes travel. If it’s a single-track system — one groove. Double-track — two. Triple-track — three grooves 70-80 mm wide each. In total, you get a frame about 250 millimeters wide with three grooves.
What’s bad about this? Dirt, debris, leaves get in there. Children run around — they can trip, hit their foot. From a safety and comfort standpoint, it’s not ideal.
A technical solution to automatically close these grooves exists — there are systems with retractable thresholds. But they’re rare and expensive. Most manufacturers, including YAWAL, don’t offer this yet.
Therefore, many clients say: «I don’t want grooves in the floor. I want a smooth floor, so it’s comfortable to walk, so nothing gets in the way».
Moreview S — smooth floor with a minimal gap
Specifically for such cases, Moreview S was developed. Here, between the rails along which the sashes travel, pieces of finishing are installed — flush with the finished floor. And the sash itself has not a P-shaped profile, but an N-shaped one.
How it works: the lower part of the sash isn’t just a sole that rolls along the rail. It’s a special «cup» of complex shape. One leg of this cup with rollers travels along the rail, then there’s a rise in the profile (the thermal bridge and insulation are inside there), and further on the glass unit is already attached.
As a result, only a 10-12 millimeter gap remains in the floor — a narrow strip along which the lower leg of the sash travels. Everything else is a smooth floor, finished with the same material as the rest of the room.
Visually this looks much cleaner. No grooves, no barriers. The sash seems to float above the floor and slides to the side, leaving behind only a thin line.
Most of our clients choose Moreview S specifically. They like the barrier-free exit to the terrace, clean floor, absence of places where dirt gets packed.
A compromise in thermal performance
But here there’s a compromise. Moreview S slightly falls short of classic Moreview in thermal performance characteristics. This is logical: in the classic version, the entire bottom frame is a massive insulated profile. In the S-version, there’s a thin leg, although it’s made with a thermal bridge, it’s still a weak point.
The difference isn’t critical. Moreview S is still much warmer than most competitors. But if you compare the two YAWAL versions with each other — the classic is warmer.
What does this mean in practice? When using Moreview S, it’s advisable to provide additional heating in the glazing area. In-floor convectors, underfloor heating with increased power in the sliding area — standard solutions that compensate for slightly increased heat loss.
With classic Moreview, you can do without such reinforcement — heat loss there is minimal in itself.
In any case, the choice between Moreview and Moreview S is a choice between maximum thermal performance and maximum aesthetics. Something has to be sacrificed. I always explain both options to the client, show the pros and cons, and they make the decision themselves based on priorities.
Сравнение с конкурентами: почему Moreview выигрывает
SkyFrame (Switzerland) — the benchmark, but not for north
SkyFrame is a legend. Swiss quality, minimalist design, engineering solutions at the highest level. If not for several «buts».
First — price. SkyFrame is prohibitively expensive. One and a half to two times more expensive than Moreview with comparable characteristics.
Second — thermal performance. SkyFrame was created for the European climate, where winters are mild. For Switzerland, Germany, France — excellent. For a north — not so much. Freezing, condensation, high heat loss.
Third — logistics. After sanctions, deliveries from Switzerland became problematic. Lead times increased, customs unpredictable, payment complicated.
Moreview with comparable functionality is 20-30% cheaper, warmer and more accessible logistically.
SolarLux (Germany) — quality is there, but the price is steep
SolarLux is another premium German brand. Good system, reliable. But again — high price, and in terms of thermal performance doesn’t reach Polish standards.
For southern regions of Germany, SolarLux works excellently. For a cold climate — barely. Plus the same story with logistics and payment.
Schuco SS77PD — a flagship with limitations
Reynaers Highfinity — a worthy competitor
Price advantage: 20% cheaper than competitors
And here’s the most interesting part. Moreview isn’t just comparable to competitors in characteristics — it’s cheaper. Significantly cheaper.
I can give a price for Moreview 20% lower than SkyFrame, SolarLux, Keller, Vizio and other premium systems. This isn’t marketing, this is reality.
Why does this happen? Several factors:
- YAWAL is a large concern with large production volumes. They can maintain a lower margin due to scale.
- Poland isn’t Switzerland. Wage levels, production costs are lower, accordingly, the final price is lower.
- We have established direct contacts with YAWAL, bypassing intermediaries. This reduces markups.
- We’re betting on this product and are ready to work with minimal margin to capture the market.
I can back this up with numbers. If you now take any SkyFrame or Schuco SS77PD supplier, request a commercial proposal for sliders, say, 4 meters high, 8 meters long — and then come to me with the same parameters — I’ll give a price for Moreview at least 20% lower. Verified on several projects.
For clients, this is critical. Because premium sliding systems are always big money. Saving 20-30% on the final cost means tens, and sometimes hundreds of thousands of dollars.
Who this system is for: not for everyone, but for the right projects
Moreview isn’t a universal solution. It’s not the system that needs to be installed everywhere and always. There’s a clear niche where this system fully reveals itself.
When Moreview is the right choice:
- Panoramic glazing with height from 4 meters. If the height is 3-3.5 meters — classic lift-and-slide will manage cheaper.
- Premium segment with aesthetic requirements. A client who is willing to pay for minimalist design and thin profiles.
- Large sashes — from 2.5 meters in width. On small sashes, the overpayment for a premium system isn’t justified.
- Projects where thermal performance is important.
- Properties where automation is planned. On large sashes, automation is a necessity, not an option.
When Moreview is excessive:
- Standard country houses with 2.5-3 meter glazing. The overpayment isn’t justified.
- Budget projects. The cost of Moreview is still high, albeit lower than competitors.
- Mass-market commercial properties — offices, shopping centers. There reliability and accessibility are needed, not designer frills.
I always explain to the client: Moreview is an investment in aesthetics and functionality. If you have an elite home, large panoramic spaces, an architectural project with an emphasis on glass — this system will justify itself. If it’s a standard cottage with ordinary requirements — it’s better to save money and install proven Alutech.
Real-life project: 5900x12000 with automation
Currently we have a project in progress that perfectly demonstrates Moreview’s capabilities. Private home, two-story living room space with terrace access. Panoramic glazing across the entire wall: height 5900 mm, length 12 meters.
Four sashes 3 meters wide each. Each sash is a single-chamber glass unit 2×12 mm. Weight of each sash about 800 kg. All sashes with automation.
Technically this is realized as follows: the Moreview S bottom frame is recessed into the floor. Upper guide rail in the ceiling. Sashes roll on rails, drives are synchronized. Control — from a wall panel and remote.
When the client presses a button, all four sashes simultaneously begin movement. They smoothly slide to the side, park in the wall junction zone. The entire two-story space opens onto the terrace. It’s truly impressive.
Cost-wise: if we did it with SkyFrame — it would come out almost twice as expensive. With Moreview it comes out within an adequate budget for this level of project.
When we finish installation, I’ll make a separate video — show how it works live. Such scales need to be seen with your own eyes, photos don’t convey it.
Technical support and design assistance
The last important point. Premium sliding systems aren’t a product you can simply order from a catalog. Design, calculations, understanding installation nuances are needed here.
We provide full technical support:
- Help calculate sash weight and select optimal configuration.
- Create layouts, drawings, 3D visualizations.
- Consult on installation — how to recess the frame into the floor, how to mount the upper guide, how to set up automation.
- Solve non-standard tasks — corner configurations, integration with security systems, smart home.
If you’re a window company and want to start working with Moreview — we’ll help you master the product. We’ll conduct training, provide technical documentation, support on first projects.
If you’re a private client or architect — we’ll do the entire turnkey project. From calculation to installation and commissioning.
Geography of work — anywhere. If there’s a task — we’ll solve it.
Why I'm betting on this
Moreview is our flagship product now. We offer it on all premium properties. We give special terms, maintain minimal margin so the product enters the market.
Why? Because I see the future in this. The elite housing market is growing. Clients are becoming more demanding, they want not just quality, but exclusive solutions. Panoramic glazing with minimalist profiles is a trend that will only intensify.
Some analogs will catch up, it’s a matter of time. But for now, European systems — and Moreview in particular — maintain leadership in engineering solutions and quality.
If you’re interested in this topic, if you have projects with large panoramic glazing — contact us. We’ll calculate, design, supply, install. Anywhere in the world.
It’s really cool — working with a product that opens up new possibilities. Seeing solutions realized on properties that previously seemed impossible. Moreview gives exactly such emotions.
